About this calculator
Count the sheets of reinforcing mesh such as A142 or A193 for a slab, allowing for overlap on every joint.
How it’s calculated
Sheets across = ceil((width − lap) ÷ (sheet width − lap)), and the same along the length. Multiply the two.
Worked example
With these inputs:
- Slab length
- 7 m
- Slab width
- 5 m
- Sheet size
- 4.8 × 2.4 m sheet (A142/A193)
- Overlap
- 200 mm
the result is:
- Sheets needed
- 6 sheets
- Slab area
- 35 m²
- Mesh area bought
- 69.12 m²
Tips from the trade
- Lay sheets so laps are staggered and don’t all meet at one point.
- Lift the mesh on chairs so it sits in the slab, not under it.
Common questions
What overlap do I need?
Follow your engineer. A common minimum is 200 mm, or one full mesh square plus a little more.
Results are estimates for planning and pricing. Check quantities against your drawings, the manufacturer’s data and the Building Regulations before ordering.